COOLER MASTER MASTERCASE SL600M MID-TOWER (ATX)
Premium Aluminum Paneling
Vertical Chimney Effect Layout
Noise Reduction Technology
Rotatable PCI Bracket Window
Versatile Storage Bracket
Advanced I/O Panel
Adjustable Top Ventilation
PREMIUM ALUMINUM PANELING
The top and front of the case are clad in anodized aluminum with a smooth sand-blasted finish.
VERTICAL CHIMNEY EFFECT LAYOUT
With the 200mm fans that take in air from the bottom, hot air rises out of the case and exits out of the top in a natural direction for efficient thermal performance.
NOISE REDUCTION TECHNOLOGY
The design of the panels inhibit noise from escaping toward the individual. The 2x200mm fans move comparatively larger volumes of air than smaller fans in a lower RPM and can operate even quieter by manually controlling the fan speed slider found on the I/O panel.
ROTATABLE PCI BRACKET WINDOW
The PCI mounting window can be rotated 90 degrees. This allows the unique ability of mounting multiple graphics-card(s) vertically or with more clearance from the glass side panel.
*riser cable not included.
VERSATILE STORAGE BRACKET
The SL600M has versatile brackets that can mount an SSD, HDD, a water pump, or reservoir. These brackets can be placed in multiple positions inside the case, including being placed behind the front panel and on the bottom radiator bracket.
ADVANCED I/O PANEL
A proximity sensor triggers the USB lighting for easy access in the dark. The panel will stay temporarily lit before turning off automatically. Furthermore, the I/O panel has a USB 3.1 (Gen 2) Type-C port, four additional USB ports, a PWM fan speed slider, a headset jack (audio + mic), and a dedicated microphone jack. The headset jack supports headsets that use a single plug for microphone and headphone signals.
ADJUSTABLE TOP VENTILATION
The aluminum top panel can be adjusted to 3 different positions. The panel can either stay flush with the mesh, raised, or completely removed.
|Model Number||MasterCase SL600M MCM-SL600M-SGNN-S00|
|Fan Support||Top 120mm x 3 or 140mm/200mm x 2 Front N/A Rear N/A Bottom 120mm x 3 or 140mm/200mm x 2|
|Pre-Installed Fans||Top N/A Front N/A Rear N/A Bottom 200mm PWM Fan x 2 (Speed: 400~800RPM / Connector: 4Pin)|
|Radiator Support||Top 120mm, 140mm, 240mm, 280mm, 360mm (maximum thickness clearance 43mm Front N/A Rear N/A Bottom 120mm, 140mm, 240mm, 280mm, 360mm (maximum thickness clearance 72mm when the GFX is installed in the vertical position)|
|Clearances||CPU Cooler 191mm PSU 200mm GFX 318mm|
|Material||Body Steel Front Panel Aluminum Top Panel Aluminum Left Side Panel Tempered Glass Right Side Panel Steel|
|Power Supply Support||Front Top Mount, ATX|
|Drive Bays||5.25" 0 Combo 3.5" / 2.5" 4 SSD 4|
|Motherboard Support||Mini-ITX, Micro-ATX, ATX (E-ATX* support up to 12" x 10.7", will limit cable management features)|
|Dimensions||544(L) x 242(W) x 573(H)mm|
|I/O Panel||Power-LED Color White HDD-LED Color White USB-Ports USB 3.1 Type C x 1, USB 3.0 Type A x 2, USB 2.0 Type A x 2 Audio In / Out 1x 3.5mm Headset Jack (audio+mic) & 1x 3.5mm Mic Jack Reset Switch N/A|
|Note*||Price, feature and specifications are subject to change without notice.|
|Expansion Slots||9 + 2 (Support vertical graphics card installation)|