







- Model: FD-PSU-IONP-860P-BK-EU
Ion+ 860W Platinum
The Ion+ Platinum is a high-performance fully modular PSU
with whisper-quiet operation, enhanced cable flexibility and superior output
quality
- UltraFlex DC wires for effortless cable-routing and
connectors
- Custom-tailored 140 mm fan with exceptionally low minimum
speed
- 80 PLUS® Platinum Efficiency for optimized electrical
performance
The power of silence
A user selectable semi-passive Zero RPM mode maintains pure
silence under light loads, and under heavy use the custom-tailored 140 mm fan
with FDB bearings barely breaks a whisper. The revolutionary UltraFlex cable
bends and twists effortlessly to make installation and cable-routing a breeze,
thanks to an ultra-high strand count wire and special insulation.
Introducing the game-changing UltraFlex cable
- Thanks to an ultra-high strand count wire and special
insulation, our UltraFlex DC wire bends and twists effortlessly to fit your
installation instead of fighting it.
- Combining an increased strand-count and reduced diameter of
just 0.08 mm allows thinner, more flexible cables
- Specially formulated insulation increases flexibility
without impacting efficiency or current capacity
- Cables flex and flow with ease for near-effortless routing
and superior cable management opportunities
- Connectors bend and twist to make for easy connections in
tight spaces with less resistance and strain
Japanese capacitors
Premium Japanese 105°C capacitors provide enhanced
reliability and durability
UltraFlex Cables
Fractal Design UltraFlex DC wires have game-changing
flexibility for effortless cable-routing and connectors that twist and bend to
fit your installation—not fight it
Zero RPM
User selectable Zero RPM mode allows for either silent,
passive operation in low load situations or continuous low speed fan operation
for additional cooling
More power, less heat
- The Ion+ Platinum is rated 80 PLUS® Platinum Efficiency for
its ability to offer electrical output of the highest quality, while generating
as little heat as possible.
- 80 PLUS® Platinum Efficiency for optimized electrical
performance and reduced heat generation
- Outstanding output quality with tight voltage regulation and
extremely low noise and ripple
- Premium Japanese 105°C capacitors provide enhanced
reliability and durability
- Over Power Protection, Over Voltage Protection, Short
Circuit Protection, Under Voltage Protection, Over Current Protection and Over
Temperature Protection
Slow, silent and smooth
- The Ion+ Platinum comes equipped with a custom-tailored
Fractal Design Dynamic Series 140 mm fan that offers exceptionally low minimum
speed as well as true long-life Fluid Dynamic Bearing.
- Fractal Design Dynamic Series 140 mm fan with exceptionally
low minimum speed and true long-life FDB bearing
- User selectable Zero RPM mode allows for either silent,
passive operation in low load situations or continuous low speed fan operation
for additional cooling
Specification |
|
Specification |
80 PLUS® Certification : Platinum Modular cables : Fully modular Cable type : Modular 24-pin: Braided sleeve UltraFlex
wire. Others: Flat UltraFlex wire Fan type : Customized 140 mm FDB bearing Fractal Design
Dynamic Series fan Maximum operating temperature at full load : 50°C Semi-passive operation : Yes, user selectable (Zero RPM) Sleep State Compliance : C6/C7 Warranty : 10 years Capacitors : Japanese Protection features : Over voltage protection. Under
voltage protection. Over power protection. Short circuit protection. Over
current protection. Over temperature protection Approvals & Certifications : CE, FCC, TUV, cTUVus,
EAC, RCM, CCC, BSMI, CB, RoHS, WEEE Life expectancy (MTBF) at max output load : 100,000 hours Input voltage : 100-240V AC Input frequency : 50-60 Hz Input current : 10A/5A Number of 12V rails : 1 PSU specification compliance : ATX12V 2.4 / EPS12V 2.92 Standby efficiency : ErP 2013 (<0.45W @230. VAC, 45 mA
load on +5Vsb) Unit measurements : 150 x 150 x 86 mm Unit weight (unit only) : 1.665 kg |
Connectors |
ATX 24-pin : 1 ATX12V 4+4 pin / EPS12V 8-pin : 2 PCIe 6+2 pin : 6 SATA : 10 Peripheral : 4 |
Cable configuration (length between connectors) |
ATX 24-pin : 600 mm ATX12V 4+4 pin : 700 mm EPS12V 8-pin : 600 mm PCIe 6+2 pin : 550+120 mm x2 SATA : 400+120+120+120 mm & 650+120 mm Peripheral : 400+120+120+120 |
DC output |
3.3 V : 22 A 5 V : 22 A 3.3 V and 5 V combined : 120 W 12 V : 71.6 A -12 V : 0.3 A 5 V Standby (+5 Vsb) : 3 A Total Power : 860 W |
Other |
Package content : Ion+ PSU with protective bag, Modular
cables in a convenient storage bag, Screw pack with Velcro cable ties, AC
power cord (localized), User manual Package dimensions (W x H x D) : 325 x 110 x 210 mm Package weight : 2.975 kg Product code : FD-PSU-IONP-860P-BK |
Warranty |
10 years |
Note* |
Price, feature and specifications
are subject to change without notice. |