- Model: HX426C16FB3/8
HX426C16FB3/8
8GB 1G x 64-Bit
DDR4-2666 CL16 288-Pin DIMM
DESCRIPTION
HyperX HX426C16FB3/8 is a 1G x 64-bit (8GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows
FEATURES
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.3425” (34.1mm), w/heatsink
Specification | |
CL(IDD) | 16 cycles |
Row Cycle Time (tRCmin) | 45.75ns(min.) |
Refresh to Active/Refresh Command Time (tRFCmin) | 350ns(min.) |
Row Active Time (tRASmin) | 29.25ns(min.) |
UL Rating | 94 V - 0 |
Operating Temperature | 0o C to +85o C |
Storage Temperature | -55o C to +100o C |
Series | HyperX Fury |
Kit type | 8GBX1 |
Memory type | DDR4 |
Tested speed | 2666 MHz |
Tested latency | CL16 288 |
Tested Voltage | 1.2V |
Memory size | 8 GB |
Capacity | 8GB (8GBx1) |
Warranty | Lifetime |
Note* | Price, feature and specifications
are subject to change without notice. |