- Model: HX426C16FB3/8
HX426C16FB3/8
8GB 1G x 64-Bit
DDR4-2666 CL16 288-Pin DIMM
DESCRIPTION
HyperX HX426C16FB3/8 is a 1G x 64-bit (8GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows
FEATURES
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.3425” (34.1mm), w/heatsink
Specification |
|
CL(IDD) |
16 cycles |
Row Cycle Time (tRCmin) |
45.75ns(min.) |
Refresh to Active/Refresh Command Time (tRFCmin) |
350ns(min.) |
Row Active Time (tRASmin) |
29.25ns(min.) |
UL Rating |
94 V - 0 |
Operating Temperature |
0o C to +85o C |
Storage Temperature |
-55o C to +100o C |
Series |
HyperX Fury |
Kit type |
8GBX1 |
Memory type |
DDR4 |
Tested speed |
2666 MHz |
Tested latency |
CL16 288 |
Tested Voltage |
1.2V |
Memory size |
8 GB |
Capacity |
8GB (8GBx1) |
Warranty |
Lifetime |
Note* |
Price, feature and specifications
are subject to change without notice. |