Menu
Your Cart

Cooler Master MasterLiquid ML360 Sub-Zero

MLZ-D36M-A19PK-12


MASTERLIQUID ML360 SUB-ZERO

The MasterLiquid ML360 Sub-Zero powered by Intel® Cryo Cooling Technology delivers a cooling solution unlike that of your traditional thermal solutions. Allowing the processor to be able to reach higher frequencies at lower voltages due to behavioral characteristics of silicon that can only be achieved through sub-ambient temperatures. Utilizing the unique combination of hardware, software and firmware to push the thermal limitations of your processor.


ML360 SUB-ZERO POWERED INTEL® CRYO COOLING TECHNOLOGY

“The MASTERLIQUID ML360 SUB-ZERO cooler is exclusively powered by Intel Cryo Cooling Technology, a unique combination of hardware, software, and firmware designed to help unleash elite performance for gamers, overclockers, and content creators.”

AGE OF CRYO-CLOCKING

Playing with the properties of Silicon to deliver a more optimized way to achieve over-clocking but not in the traditional sense. Unlike using solutions such as liquid nitrogen, the Sub-Zero is designed to allow gamers and content creators to achieve those higher frequencies while giving off less heat and ability to run at high frequencies as usual while using less power.

The ML360 Sub-Zero pushes the thermal boundaries of standard cooling solutions while adapting to the limitations of being a closed loop liquid cooler. This will allow for maximum potential of your CPU to realized, especially during low core count OC that can only be done with sub-ambient cooling. Cryo-Clocking pushes the frontier on innovation by introducing a sub-ambient cooling solution, unique in design and technology driven.

KEY FEATURES
  • Sub-Ambient Cooling
    Specifically designed using Thermoelectric Unit (TEC) to cool your processor and create the conditions that allow it to achieve low core count over-clocking.
  • Powered by Intel Cryo Cooling Technology
    Designed with a simple user interface making it easy to understand and control the sub-ambient cooling potential.
  • Cryo-Clocking
    Silicon can reach higher frequencies at lower voltages that can only be achieved through sub-ambient cooling. The concept of Cryo-Clocking is to push the performance of the CPU to reach maximum capacity within the limits.
  • 2nd Generation Pump
    Enhanced pump delivers higher liquid flow for exceptional heat removal.
360 MM RADIATOR WITH SF120R FANS

High Performance Air Balance fans designed to spin at low rpm with great air pressure to air flow ratio. With a 360 radiator to dissipate heat efficiently.


 SPECIFICALLY DESIGNED WATER BLOCK
  • The circuit board features built in sensors for temperature and dew point to help minimize the effects of condensation.
  • 52x52mm TEC unit is built-in to the water block to cool you CPU.
  • Sensors communicate temperature and humidity conditions back to the system.
  • This seal maintains steady processing performance, as well as preventing condensation and external elements to protect your system.


IMPROVED AND ENHANCED PUMP

Newly Designed Pump traditionally used in DIY cooling systems with high performance motor that has an enhanced repeller to dissipated heat from the TEC in a more efficiently.

RECOMMENDED INSTALLATION

Top Mounted 360 mm Radiator

Front Mounted Pump

To get the best performance for your system for you CPU we recommend a top installation of the 360mm radiator and a front installation of the pump. The fans are pre-installed on the radiator and pump bracket pre-attached (out-of-box).

SETTING UP OVERCLOCKING ON YOUR CPU

Overclocking your CPU doesn’t have to be complicated and can be achieved in 2 basic ways:

Overclocking through BIOS Settings
OR
Using Intel XTU Software
(For more info on downloading and setting up XTU software, click the link below)

 

 

Specification

CPU Socket

LGA1200

Model Number

MLZ-D36M-A19PK-12

EXTERIOR COLOR

Black

WATERBLOCK DIMENSIONS

89 x 79 x 86.7 mm / 3.5 x 3.1 x 3.4 inch

RADIATOR MATERIAL

Aluminum

RADIATOR DIMENSIONS

394 x 119.6 x 27.2 mm / 15.5 x 4.7 x 1.1 inch

PUMP DIMENSIONS

57.3 x 57.3 x 92.2 mm / 2.3 x 2.3 x 3.6 inch

PUMP MTTF

198,000 Hours

PUMP NOISE LEVEL

< 35 dBA

POWER CONNECTOR

4-Pin

PUMP RATED VOLTAGE

12 VDC

PUMP RATED CURRENT

1.0 A

PUMP POWER CONSUMPTION

13.8W (Max)

FAN DIMENSIONS (L X W X H)

120 x 120 x 25 mm / 4.7 x 4.7 x 1 inch

FAN QUANTITY

3 PCS

FAN LED TYPE

Non-LED

FAN SPEED

650-1900 RPM ± 10%

Fan Airflow

59 CFM (Max)

FAN NOISE LEVEL

8 - 26 dBA

FAN PRESSURE

2.0 mmH₂O (Max)

FAN LIFE EXPECTANCY

160,000 Hours

FAN POWER CONNECTOR

4-Pin (PWM)

Pump Rated Voltage

12VDC

TOTAL POWER CONSUMPTION

200 W

RAM CLEARANCE

N/A

LED INDICATOR

Red --- Off line, Blue --- On, Green --- Cryo mode , Purple --- Unregulated

COOLER TYPE

Liquid Cooler

SERIES

MasterLiquid Maker

Warranty

5 years

Note*

Price, feature and specifications are subject to change without notice

 

 

Write a review

Note: HTML is not translated!
Bad Good
Captcha
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.