Lian Li Lancool 215 - Black

Lancool 215

LANCOOL 215 features two pre-installed 200MM RGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.

Optimized Thermal Management

Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system.

Included Fans

Pre-installed fans ensure the case runs at peak performance.

Honeycomb vents

The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.

Multi cooling systems support

Supports a maximum of 7 fans and radiators in various sizes and configurations. 

Ultimate cooling system scenario

With two 200MM fans mounted outside of the frame, you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator.

Stunning Pc Illumination

Move air stylishly with ARGB effects

Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.

ARGB synchronization with the motherboard

Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.

Effortless Cable Management

Pre-installed fan hub

The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.

Plenty of space for cable management

The 22MM thick space behind the motherboard ensures the cables fit in well.

Keep the cable nice and neat

The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.

Storage & Motherboard Support

E-ATX Motherboard Compatible

Fits motherboards with a maximum width of 280MM.

Removable/adjustable cage supports

2 x 3.5” HDD or 1 x 3.5” HDD + 1 x 2.5” SSD

2 x SSD support behind the motherboard

Simple Dust Management

The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.